Opple Lighting

Technical Specifications Lifetime (L70) 70,000 h Lifetime (L80) 50,000 h On-/Off-cycles 100,000 Colour consistency (SDCM) 4 Dimmability On-Off / DALI2 / BLE2 / Sensor controlled (MD) Sensor type No sensor / Motion + Daylight detection (MD) Sensor technology No sensor / Microwave (MW) Beam angle 120° Finishing Grey RAL 7035 RAL-Number 7035 Colour rendering index (CRI) > 80 Ingress Protection (IP) IP66 Impact strength (IK) IK08 Protection class I Risk group (EN 62471) RG1 With control gear Yes Glow wire test 850°C Driver failure rate (at 5,000 hrs) < 0.5% Power factor > 0.9 Input wire Ø (mm) 1mm² - 2.5mm² Internal wiring (mm²) 3x2.5 / 5x2.5 mm² Input cable Ø (mm) 5 - 11 mm Electrical Supply Frequency 50 - 60 Hz Nominal voltage 220 - 240 V DC input voltage See catalogue appendix Connection Specifications Mechanical Properties Housing material Polycarbonate Optical material Polycarbonate Mounting clips Stainless steel Ambient Conditions Operating temperature -20 ~ 45°C Application temperature 25°C Storage environment -30 ~ 60°C Dimensional Drawing (mm) A B C A B C L600 607 72 78 L1200 1208 72 78 L1500 1508 72 78 Installation Possibilities Version April 2024 Data subject to change 132

RkJQdWJsaXNoZXIy ODY1MjQ=